I have a problem when i active the ZB enclosure (MMC, RTC) and the ttys0 with the doc: How to disable the console port messages to enable the use of J10 as normal serial port /dev/ttyS0 from ACME site. My foxboard don't boot. Please help me ! Thank you for your help ! Olivier ...

Disabling all debug, kernel and syslogd messages, coming out from the ttyS0 serial port (physically on the J10 header), you will be able to use the ttyS0 as a general serial port without any disturbing boot and debug messages. To do this you have to change an option in the kernelconfig. ...

I am presuming here that dev/ttyS0 is actually enabled and on irq 4 ... but it tells me that I cannot open host device /dev/ttyS0 for read/write access - check ...

I installed kmlofax on Mandrake 9.1 and set the connection to ttyS0 in the configuration. ... But is there really the access to /dev/ttyS0 restricted in Mandrake 9.1 to users? ...

It is a serial device connected to /dev/ttyS0 and xxd /dev/ttyS0 shows activity for both the active and passive digitizer events. ... Driver wacom Identifier stylus Option Device /dev/ttyS0 # SERIAL ONLY Option Type stylus Option ForceDevice ISDV4 ...

kernel /vmlinuz-2.6.9-78.EL ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0,115200 ... By adding both parameters console=tty0 and console=ttyS0,115200, the output of the kernel is sent to both consoles. ...

echo SYST:LOC > /dev/ttyS0. Now I had it all automated. This simple bash script controls both the DAQ card and the multimeter and saves the multimeter values in a text file. No need for me to wait at the setup nor write or copy the values anywhere. ...

fenris@ubuntu:~$ sudo wvdialconf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0: ATQ0 V1 E1 -- failed with 2400 ... ttyS0: ATQ0 V1 E1 failed with 9600 baud, next try: 115200 baud ...

[ 37.531286] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 37.531841] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 37.532138] 0000:04:00.3: ttyS1 at I/O 0x1020 (irq = 18) is a 16550A. setserial command ...

If you have connected to the port which Windows would call COM1, you are on /dev/ttyS0; COM2, /dev/ttyS1; and so on. ... cat /dev/ttyS0 (replacing /dev/ttyS0 with the device file of your serial port) and typing into the terminal. ...

The same happens with both ttyS0 and ttyS1. Now a bit background information: Vector Linux kindly starts the serial ports on startup, and a dmesg |grep ttyS reveals that both ttyS0 and ttyS1 are active. ...

Put the following in /etc/event.d/ttyS0: start on runlevel 2 start on runlevel 3 start on runlevel 4 start on runlevel 5 stop on runlevel 0 stop on runlevel 1 stop on runlevel 6 respawn exec /sbin/getty 115200 ttyS0 ...

vmlinuz', '-initrd', 'C:\\asa\\asa802-k8.bin.unpacked.initrd', '-append', 'auto console=ttyS0,9600 ... vmlinuz', '-initrd', 'C:\\asa\\asa802-k8.bin.unpacked.initrd', '-append', 'auto console=ttyS0,9600 ...

Tutorial For Zte Mc315 Cdma 1x Reliance On Linux: How to enable and connect to internet on Linux Using Reliance ZTE MC31 ... output : 0.0: ttyS0 at I/O 0x2e8 (irq = 3) is a 16C950/954 ...

Anyway, the mouse is a Microsoft serial mouse on ttyS0 (COM1 in win95) ... Googling I found that X and gpm can not share ttyS0 (makes sense) however gpm is not installed yet. ...

[17179574.428000] serial8250: ttyS0 at I/O 0—3f8 (irq = 4) is a 16550A dari port serial onboard ... Tekan A Untuk merubah device yang ingin digunakan ( /dev/ttyUSB0 untuk converter usb to serial, ttyS0 untuk port serial onboard) ...

ttyS0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud. ttyS0: ATQ0 V1 E1 ... ttyS0: ATQ0 V1 E1 -- and failed too at 115200, giving up. ...

1: Console on null. 2: Console on ttyS0. 3: Console on framebuffer ... ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 ...

dialkan nombor telefon (oleh sebab saya buat kat ofis, hanya gunakan nombor extention aje) yang bersambung dengan modem di server linux (modem bersambung pada com1 - ttyS0). Gunakan 'loginsaya' sebagai login dan 'passwordsaya' sebagai katalaluan untuk memasuki dial-in server. ...

Zte Mc315 Rconnect Data Card , Anyone Got It Working Under Linux: ... output : 0.0: ttyS0 at I/O 0x2e8 (irq = 3) is a 16C950/954. Step 2. edit /etc/wvdial.conf ...